A plunge cut is a form of cut that goes in the the surface of a cloth from above. Plunge-cutting having a router should be done which has a specific plunge router along with a plunge-cutting router bit - a router bit with a bottom cut facility, this means their cutting edges extend throughout the bottom from the bit. Other routers are fixed base routers will not be suited to making plunge cuts.

Make sure you hold the right kind of router bit. Ensure the bit you choose was created to plunge-cut, or, the top will spin from the surface of the material and can burn it. Plunge cutting router bits could possibly be labelled as bits which has a bottom cut function, but when you're unsure check the specifications of individual bits prior to using them. With all the wrong equipment can harm your machinery as well as your workpiece.



Set the peak of your respective router bit. If you wish to plunge-cut down to a unique depth, you need to set the depth on your own router before working. How you try this is determined by the brand of router you decide on, but a majority of work with a form of depth stop (often a rod and column) that can be adjusted for the height you might need. The depth stop limits what lengths into material the bit can be lowered. The Trend branded routers possess a 3 turret depth stop that permits you to pre-set 3 separate heights for plunge cutting that can be changed as you work.

The first step. Start the router reducing the part down onto the workpiece.

Step two. Once the bit has cut through the surface, you'll be able to slowly move the router to create your favorite cut.

Make deeper cuts progressively! Plunging deeper than several millimetres using a single cut really should not be done. Instead, you must produce a series of shallow cuts that will get progressively deeper. Which means less strain is put around the cutting edges of your respective router bit, as well as on the router's motor itself.

Take regular breaks. Every so often you should bring the router bit back up from the material and turn the router off so the motor and router bit can cool-down, and you will clear any debris in the cut. Its also wise to clear any waste from your cut in order to avoid it from becoming clogged. Be sure to make use of an appropriate dust extractor with the routers.

More info about cnc wood router please visit webpage: click for more.