Tips on how to Plunge Cut With a Hand Wood Router

A plunge cut is a cut which goes in to the the top of a fabric previously mentioned. Plunge-cutting with a router should only be achieved using a specific plunge router and a plunge-cutting router bit - a router bit which has a bottom cut facility, this means their cutting edges extend through the bottom of the bit. Other routers are fixed base routers and will not be ideal for making plunge cuts.

Be sure to hold the right kind of router bit. Guarantee the bit you choose was created to plunge-cut, or, the top will spin from the surface of the material and can burn it. Plunge cutting router bits might be labelled as bits using a bottom cut function, in case you're unsure always check the specifications of individual bits prior to using them. With all the wrong equipment can damage your machinery plus your workpiece.



Set the peak of one's router bit. In order to plunge-cut into a specific depth, you must set the depth on the router before working. How you do this depends upon the brand of router you decide on, but many make use of a way of depth stop (usually a rod and column) which can be adjusted on the height you require. The depth stop limits the length of time into material the part could be lowered. The buzz branded routers have a 3 turret depth stop that allows you to pre-set 3 separate heights for plunge cutting that could easily be changed as you work.

Step one. Activate the router minimizing the bit down on top of the workpiece.

Step 2. After the bit has cut through the surface, you can move the router to create your best cut.

Make deeper cuts progressively! Plunging deeper than several millimetres having a single cut really should not be done. Instead, you should come up with a number of shallow cuts that will get progressively deeper. Which means that less strain is scheduled for the cutting edges of the router bit, and also on the router's motor itself.

Take regular breaks. Once in awhile you need to bring the router bit back up from the material and switch the router off and so the motor and router bit can relax, and you can clear any debris in the cut. It's also wise to clear any waste materials from your cut to avoid it from becoming clogged. Ensure you make use of an appropriate dust extractor with all the routers.

More info about cnc processing center have a look at our site.
Back to posts
This post has no comments - be the first one!

UNDER MAINTENANCE

XtGem Forum catalog